Computations menu
This menu brings together the various geometric computations that can be performed with points, as well as operations with observations, coordinate transformations, etc. The commands are:
- Rectangular to polar: Calculates the azimuth and the distance from the coordinates of two points. This option is enabled only if a point file is active.
- Polar to rectangular: Calculates the coordinates of a point from those of another point, an azimuth and a distance. This option is enabled only if a point file is active.
- Intersection of lines: Calculates the coordinates of the intersection point of two straight lines. These lines can be defined by two points or by a point and an azimuth. This option is enabled only if a point file is active.
- Intersection of line and circle: Calculates the coordinates of the intersections between a circle and a straight line. The line can be defined by two points or by a point and an azimuth. The circle can be defined by three points, two points, the center and the radius, or the center and a point on the circle. This option is enabled only if a point file is active.
- Intersection of circles: Calculates the coordinates of the intersections between two circles. The circles can be defined by three points, two points, the center and the radius, or the center and a point on the circle. This option is enabled only if a point file is active.
- Computation of arcs: Calculates an arc defined by three points and lets you store the coordinates of its center. This option is enabled only if a point file is active.
- Computation of distances: Calculates the distance between two points in UTM projection or defined by geographic coordinates.
- Triangle solver: Calculates the elements of a triangle from three of its elements, whether sides or angles.
- Maximum and minimum: Calculates the maxima, minima and coordinate increments of a set of points. This option is enabled only if a point file is active.
- Area computations: Calculates the area of a closed element formed by a given set of points. This option is enabled only if a point file is active.
- Profiles: Generates drawing files with longitudinal or transversal profiles formed by a given set of points. This option is enabled only if a point file is active.
- Transformations: The program offers several coordinate transformations, which are enabled only if a point file is active:
- Helmert coordinate transformation: Performs a 2D or 3D transformation from known transformation parameters.
- Transformation of geographic coordinates: Transforms a file of geographic coordinates into the current file, or transforms the current point file into a file of geographic coordinates.
- Manual transformation of geographic coordinates: Transforms geographic coordinates entered manually into the current point file.
- Transformation of coordinates from the Struve ellipsoid to Hayford: Transforms coordinates from the old Spanish geodetic network, whose ellipsoid was Struve's and whose datum was in Madrid, to ED-50, which uses the Hayford ellipsoid and the Potsdam datum.
- Transformation of coordinates between different reference systems: Transforms coordinates between different projections or reference systems.
- Transformation of coordinates using an NTV2 grid: Transforms coordinates between different reference systems by interpolating the corrections stored in a file.
- Transformation of units: Transforms values to different units, covering both angular and linear units.
- Transformation of heights using a grid: Transforms the height coordinate by interpolating in a grid of altitude values that can be added to or subtracted from the current value.
- Generate data information: Generates an HTML file with the data sheets of control points or vertices, from their photos or sketches. This option is enabled only if a point file is active.
- Compute average Face1/Face2: Calculates the systematic errors of an instrument from the observations in direct circle (DC) and inverse circle (IC) between a set of points. This option is enabled only if an observation file is active.
- Compute accidental errors: Calculates the random errors associated with an instrument and a set of observation characteristics. This option is enabled only if an observation file is active.
- Compute average of series: Calculates the average observations of a set of repeated observations between the same station and the same target point, taken to improve accuracy. This option is enabled only if an observation file is active.
- Levelling: Tool for calculating the height difference between points from the file with the readings of a geometric levelling.
- Compensation levelling network least squares: Adjusts, by the mathematical method of least squares, a levelling network formed by a set of points between which height differences have been measured.