Edit

Classify railway ground

Classify railway ground

The /SUELOFFCC command classifies the points of a railway (FFCC) point cloud recorded with an MMS (Mobile Mapping System, vehicle-based recording) as ground or non-ground. It performs the same operation as the Bare ground button in the Train path panel of the MMS tab, but it does not show the dialog box: it reads the options from the [TrazaMMS] section of the MDTopX.ini file and processes every point source (recording identifier) in the file.

To run this tool from the command line, enter:

MDTopX [archivo de entrada] /SUELOFFCC

The input file can come before or after /SUELOFFCC (MDTopX /SUELOFFCC via.las). The command takes no arguments.

Files

  • Input file: a point cloud (for example, LAS or LAZ) or an MDTopX project that contains point clouds.
  • Output file: this command has no output file and takes no arguments. If you enter a second file on the command line, MDTopX ignores it. MDTopX saves the classification in the input file itself. If the input file is a project, MDTopX saves each point cloud in the project after classifying it.

Differences from /SUELOVIAL

/SUELOFFCC and /SUELOVIAL read the same [TrazaMMS] section, with the same keys, default values, licenses and files. See that page for the list of keys. The differences are:

  • /SUELOFFCC replaces the value of the EsFFCC key with 1 before calculating. The EsFFCC key in MDTopX.ini has no effect on this command.
  • MDTopX filters the cloud with a grid whose step is the value of DistanciaMaxima, so that the grid keeps enough points of the narrow strip of terrain under a viaduct. In /SUELOVIAL, the step of that grid is 1 meter.

Section and key names are case-insensitive.

See also: