Edit

Toolbar Coordinates

This toolbar contains the tools for calculating point coordinates by radial survey, intersection, resection, traversing and network adjustment. These tools are only available if a project is active, and they are:

Toolbar Coordinates

  • Icon COGO: Calculates, using coordinate geometry (COGO), the coordinates of new points from the coordinates of a station and the corresponding angle and distance observations.
  • Icon Intersec: Calculates the coordinates of new points from the angle observations made from at least two points with known coordinates to a point with unknown coordinates.
  • Icon 3-Resect: Calculates the coordinates of new points from the angle observations made to at least three points with known coordinates from a point with unknown coordinates.
  • Icon Hansen: Calculates the coordinates of two points from the observations made from those two points, with unknown coordinates, to two other points with known coordinates.
  • Icon 2-Resect: Calculates the coordinates of a point from the angle and distance observations made from that point to two other points with known coordinates.
  • Icon Altimetry: Calculates the height of a set of points from the observations made in an altimetric network, starting from at least one point with a known height.
  • Icon Traverse: Calculates the coordinates of new points from the chain of angle and distance observations made between these points and at least one point with known coordinates.
  • Icon Comp3D: Adjusts, by the least squares mathematical method, a network formed by a set of points between which angle and/or distance and/or altimetry observations have been made. To perform this calculation you need approximate coordinates of the non-fixed points of the network, for which you can use the other tools listed here.