Blog

News, tips, and notes on our products.

January 24, 2016

Tip: Make Digi3D.NET use less memory and start faster

When you install Digi3D.NET on your computer, the installer activates 100%'s functionality by activating all available extensions. This causes the program to load many DLLs that you may never have used and that you will never use. This affects the loading time of the application

advanced configuration registry tips
January 23, 2016

Tip: Make .bin the default file format in Digi3D.NET instead of .bind

The drawing file format .bind incorporated in Digi3D.NET has many advantages over the classic .bin as for example: Identification within the own file of the coordinate reference system of the entities. Double precision in the coordinates. Native system for multi

drawing_files registry tips
January 19, 2016

Native loading of JPEG files in the photogrammetric window

Digi3D.NET has always been able to load JPEG files in the drawing window, never in the photogrammetric window. The reasons for not adding this possibility were as follows: Classic photogrammetric cameras (airplane cameras, not drone cameras) save images in TIFF format natively.

jpeg photogrammetric window
January 17, 2016

Native loading of satellite orientations from Inpho project files

We have just added to Digi3D.NET the native loading of Inpho project files (\.prj) with RPC polynomials for satellite images. In this way, Digi3D.NET can work with aerial triangulations calculated with Inpho in a completely transparent way for the user

inpho rpc satellite satellite
January 4, 2016

Changes to the camera system

Due to the incorporation of the distortion correction model in cameras calibrated with Pix4D, PhotoScan and with OpenCV, we have made a number of changes to the camera concept in Digi3D.NET. The changes made are internal and we have maintained backward compatibility, so that

camera file calibration calibration certificate
December 29, 2015

Native loading of Pix4D camera calibration files

We have just implemented the first new feature of Beta version 2016 of Digi3D.NET: Native loading of Pix4D camera calibration files. If you process a project with Pix4D, it creates a camera calibration file whose name follows the following pattern: name\ of\ project \ pix4d\

calibration cameras pix4d
October 8, 2015

New real-time triggers

We start a week that we will dedicate to adding new quality controls in real time. We present you two new triggers that will allow us to detect at the time of digitize the following conditions: 1. Detect if a point has been digitized near another point

Quality control ccc triggers
October 7, 2015

Running commands when pressing the Data button

We have just added a new feature in Digi3D.NET, which allows us to indicate in the code table a set of commands to be executed when pressing the DATO button if Digi3D.NET is in prepared mode and the active code is the code in which we have added that set of commands

digitab