News, tips, and notes on our products.
We can configure Digi3D.NET to automatically change the zoom factor of the drawing window when we change the zoom factor of the photogrammetric window, in this way both windows will show approximately the same model extension. To do this, we just have to follow
Simultaneously cropping multiple polygons at their intersection with a boundary line is very easy with the command TRIM_POLYGONS from Digi3D.NET. This command prompts you to select the line that defines the crop boundary and crops all polygons that intersect with that line,
Crop polygons in Digi3D.NET is very easy with the command TRIM_POLYGON. Just select the polygon to crop and the line that acts as boundary. The command will crop the polygon generating as many parts as necessary. The polygon to crop can be either a closed line or
We introduce the command JOIN_POLYGONS that allows us to join two polygons with a common side and form a single polygon. The two polygons must meet the following requirements: 1. They must have the same codes. No matter the order of the codes, if the first polygon has the codes A and B, the second polygon has the codes A and B
You can now use your own floating mark in the photogrammetric window with the new option added to Digi3D.NET. The POINTER_TYPE command now cycles through: 1. Small floating mark 2. Medium floating mark 3. Large floating mark 4. Diagonal cross 5. Horizontal cross 6. Custom If
Today we present the Digi21 help center where you can find answers to any questions you have regarding any Digi21 program.Enter the help center at www.digi21.net by selecting the menu option Technical Support/Find solutions to your problems and request support
We have added a new sensor to Digi3D.NET that allows you to load images obtained with the VisionMap A3 camera. This camera is characterized by using a sensor model called VM Quari panoramic and the result is one image per pass (as in the ADS40/80 cameras of Leica) but taken with a wide angle lens
We have added to the Web Map Tile Service (WMTS) sensor the possibility of loading .png images so that now the sensor is compatible with all those WMTS servers that only provide images in that format, such as the one provided by the Spatial Data Infrastructure
Digi3D.NET allows you to load camera files generated with a multitude of programs (such as Calibra, RapidCal, EspaKernel, ...) natively. Thanks to these camera formats, we can work with medium-format and non-metric cameras. If you do not have a calibration file in one of the
We have added the Web Map Tile Service sensor to Digi3D.NET! This sensor will allow you to connect to Web Map Tiles Services such as the PNOA Orthophotos in high resolution. The Web Map Tile Service servers differ from the Web Map Service in that they are not as