News, tips, and notes on our products.
We have just added to Digi3D.NET a new tool that will allow you to visualize graphically the database information associated with a drawing file.Basically it consists of creating a virtual reference file that points to one of the files we have loaded, but instead of
We have just added a new stereoscopic display mode in Digi3D.NET that will allow working with monitors or televisions 3D that implement the Side by Side mode 3D . This mode does not require having a stereoscopic graphics card (i.e., from the Quadro family) and is useful to be able to
We have changed the way of requesting demonstrations of any of our programs. From now on, if you want to request a demo, you can do it directly on our website, clicking on the option Request a demo in the main menu of the website or
We have redesigned the extension of Digi3D.NET that is responsible for loading images in JPEG format to make the loading of this type of images much faster. Now the extension uses the buffered mode that allows you to reload the same image several times and also we have moved to
The ADS sensor (40, 80, 100...) has always been the most complicated to configure among all the sensors that Digi3D.NET has, because there is a field to configure DataPath that is not intuitive enough. When we select as active sensor the ADS sensor, the program requests three files:
Yesterday we could see the new command of Digi3D.NET that allowed us to detect short segments. Today we present a command that will allow us to automatically delete short segments: REMOVE_SHORT_SEGMENTS. You can also run this command through the Analysis menu option
Sometimes we want to detect as errors segments that have a perimeter less than a certain value. We have just added to Digi3D.NET a command that will allow us to automatically detect these segments: DETECT_SHORT_SEGMENTS. This command allows us to indicate the code to analyze
Sometimes we have a drawing file loaded in Digi3D.NET and we want to export only some of the entities in that file. The EXPORT command exports all visible entities, but it does not have the possibility to indicate which entities to export, so in the end we end up
We have just added another tool to Digi3D.NET to perform quality control of the mapping: detection of loops (or auto intersections) in existing geometries. The new command DETECT_LOOPS expects that we indicate as parameter the code to analyze
We have just added two commands to Digi3D.NET that complement INS_PHOTO, which applies the same scale factor to the X and Y axes of the inserted image. INS_PHOTO_2P_AA inserts photos fitted to the rectangle defined by digitizing two points and with the